Lightwave Communications SCS3230 Manual de usuario Pagina 26
- Pagina / 97
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ConsoleServer 3200 System Lightwave Communications
Rev. A - 26 - www.lightwavecom.com
4.3 Connecting to the TERM Port
The cable kit P/N 200.0135 contains the necessary adapters to interface the system TERM port
on the NETWORK / CONTROL card to a laptop or a terminal. Using the adapters in the kit,
follow the steps outlined below.
The communications settings for the system administrator port (TERM) are fixed at 9600 baud,
one stop bit, no parity, eight data bits, and DCE (9600 8N1 DCE).
NOTE: The administration functions may also be reached via telnet. However, it is first
necessary to configure the network ports through the direct serial connection.
1. Turn on power to the terminal or computer. If using a computer, start the desired
communication program. The terminal or communications program used must
be in VT100 emulation mode. Note that the VT100 functions keys are not always
mapped to the terminal or computer function keys; consult the appropriate
documentation for further information.
2. Ensure that the communications settings of your Terminal are correct.
3. Locate the serial port on the terminal or computer and determine what type of
connector is used. The cable kit included with the SCS3230 contains each of the
following: one RJ45 serial cable, an RJ45 to male DB9 adapter, an RJ45 to
female DB9 adapter, an RJ45 to male DB25 adapter, and an RJ45 to female
DB25 adapter. Select the appropriate adapter for the serial port on the terminal
or computer.
4. Firmly seat the adapter in the serial port. Screw down the adapter to secure it to
the serial port.
5. Insert one end of the serial cable into the adapter until a click is heard. Insert the
other end of the serial cable into TERM port of the NETWORK / CONTROL card,
again until a click is heard.
6. Press <ENTER> on the keyboard. The login> (using Telnet) or login as: >
(using SSH) prompt should appear. If not, check that the SCS3230 is connected
to the appropriate power outlet, the power switch is on, the cards are firmly
seated, and that all cable connections are secure. If "garbage" characters
appear on the screen, check that the communications settings are correct.
7. The system administrator may now login to the system.
- SCS3230 1
- Copyright & Trademark 2
- Disclaimer & Revisions 3
- Declaration of Conformity 4
- 15.00.038 v May 2002 5
- 15.00.038 vii May 2002 7
- For Your Notes 8
- 1: Product Description 9
- 1.2 Upgrade Description 10
- 1.3 System Features 10
- 1.4 Hardware Features 11
- 15.00.038 - 13 - May 2002 13
- 1.5.1 10/100 Port (Network) 14
- 1.5.2 TERM Port (Console) 15
- 2: System Overview 16
- 2.5 Interface 17
- 2.4 Security Passwords 17
- 3: System Components 18
- 3.2 Device Cards 19
- 3.3 Access Cards 19
- 3.3.3 TERMINAL Cards 20
- 3.3.4 3200 Network Cards 20
- 3.3.6 Modem Card 21
- 4.1 Items in a SCS3230 Kit 22
- 4.2.2 Restore Procedure 23
- To Update a Card or Cards 25
- 5.1 Terminal Card 27
- 5.2 NETWORK / CONTROL Card 28
- 5.3 Modem Card 28
- 5.4 Device Card 29
- ConsoleServer 3200 31
- %&'( 32
- System Administration 33
- 6.1 Power-up Sequence and 34
- 15.00.038 - 35 - May 2002 35
- 6.1.3 Logging Out 36
- 15.00.038 - 37 - May 2002 37
- 6.1.5 Abbreviations 38
- 15.00.038 - 39 - May 2002 39
- 6.3 Setup Script 40
- 15.00.038 - 41 - May 2002 41
- 15.00.038 - 43 - May 2002 43
- 6.3.2 Timezone (Clock) 44
- 15.00.038 - 45 - May 2002 45
- 6.3.3 Configure DNS 46
- 15.00.038 - 47 - May 2002 47
- 6.3.4 Hosts 48
- 6.3.5 Services 49
- 6.3.6 Syslog 50
- 6.3.7 SSH Logins 51
- 6.3.8 TELNET logins 52
- 6.3.9 NTP Daemon 52
- 15.00.038 - 53 - May 2002 53
- 6.3.12 Ping Attempts 55
- 6.3.13 Confirm Changes 57
- 6.3.14 SAVE Command 58
- 7.1 Adding a User ID 59
- 7.2 Editing a User ID 61
- 7.3 Listing User IDs 61
- 7.4 Deleting a User ID 63
- 7.5 Devices Command 63
- 7.6 Terminals Command 65
- 7.7 Network Commands 65
- 7.8 Modem Command 66
- 7.9 Status Commands 67
- 7.9.2 LISTCARDS Command 68
- 7.9.3 VERSION Command 68
- 7.9.4 INFO Command 69
- 7.9.5 POWERSTATUS Command 70
- 7.9.6 LOG Command 70
- 15.00.038 - 71 - May 2002 71
- 7.10.1 LINESPERPAGE Command 72
- 7.10.2 TIMEOUT Command 72
- 7.11.1 BREAK Command 73
- 7.11.2 FORCELOGOUT Command 73
- 7.11.4 MODEMTIMEOUT Command 74
- 8.1 Terminal Card 75
- 8.2 Network Card 75
- 8.3 Modem Card 76
- 8.4 Overview of Commands 77
- 8.6 Logging Out 80
- 8.7 Checking Connections 80
- 8.8 Selecting a Device Port 81
- 15.00.038 - 83 - May 2002 83
- 8.10 Direct Mode 84
- 8.11 Using the Buffer 85
- 15.00.038 - 87 - May 2002 87
- 15.00.038 - 91 - May 2002 91
- Panel 12 (press down) 93
- Panel 13 (press down) 93
- 12: Appendix A – Command 94
- Abbreviations 94
- 15.00.038 - 95 - May 2002 95
- 15.00.038 - 97 - May 2002 97
Relacionado con productos y manuales para Redes Lightwave Communications SCS3230
(88 paginas)Zanussi ZRT618W Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Kühl- und Gefrierschränke Zanussi ZRT618W.
Wir stellen 3 PDF-Handbücher Zanussi ZRT618W zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung, Grundlegende Anleitung
Comentarios a estos manuales