Lightwave Communications Server 3200 Manual de usuario

User Manual 21 June 2001 Consoleerver S

6address. The network card must be connected to a network that uses TCP/IP. Devices connected to the network card must be at 10 Mbits (no auto–nego

74.0 Installation Instructions 4.1 Items in the Shipping Container a) ConsoleServer 3200 user manual b) User and Sys Admin Quick Reference Cards c

8the unit. Alternate power cords are available for all national connector standards. The standard AC power module has dual inputs. The DC power mo

94. Firmly seat the adapter in the serial port. Screw down the adapter to secure it to the serial port. 5. Insert one end of the serial cable in

105.0 Connecting Equipment to the ConsoleServer 3200 When connecting devices to the ConsoleServer 3200, be sure to use Lightwave Communications cab

115.2 Network Card The network card runs at 10 Mbits, half-duplex, with no auto-negotiation. The device used to connect the ConsoleServer to the ne

125.4 Device Card The ConsoleServer 3200 is designed so that the default device port communications settings will match the communications settings

13Standard DB9 or DB25 installation: Materials: • ConsoleServer 3200 device port • device with RS-232-C serial console port • RJ45-terminated Cat

14ConsoleServer 3200 Adapter Quick ChecklistHP9000SGI(Origin,O2, Octane, Onyx2)AdapterDB9-RJ45200.0070Terminal CableRJ45-RJ45 CableRJ45-RJ45 CableAda

15 SWITCHBBBBBBBBBDDCCDDDDDDCCCCCCDEVICEAAADEVICE CONTROLAAAAAADEVICE DEVICE DEVICEDEVICEDEVICEDEVICEBBBBDDDD0ICCCCAAAATERMINALTERMINALSWITCHTERMINAL

Lightwave Communications, Inc. 100 Washington Street Milford, CT 06460 USA (800) 871-9838 • (203) 878-9838 • Fax: (203) 874-0157 Email: info@lightwa

166.0 ConsoleServer 3200 Administration The following section outlines the administration functions and commands. The administration functions and

17The serial terminal will display the following text at power-up: ConsoleServer3200 Boot V1.76 Copyright 2000 by Lightwave Communications, Inc.

186.1.2 Logging In, Network Connection UNIX_MACHINE# telnet 172.16.1.200 5000 Connecting to 172.16.1.200 port 5000... Escape sequence is ^] Welc

19LOGGED OUT HELP SCREEN LCI3200>>help ConsoleServer 3200 Sys Admin Command List [] - optional <> - parameter must be specified

20 1 will refer to the netterm subsystem and 2 will refer to the network subsystem on the card F1 - G1 switch cards (do no

21INFO - (no abbreviation) LCIUPDATE - (no abbreviation) LINESPERPAGE - LINESPP

226.2 Creating and Managing Users 6.2.1 Adding a User ID The ADDUSER command creates user IDs and assigns initial privileges. The following scre

23 Fig. 4 Device Port Numbering HELPFUL HINT: Make a diagram or spreadsheet of connections indicating connections between devices and the ConsoleSer

24 sys admin>>ADDUSER Number of available user records: 200 Number of users defined: 0 Enter user id | USER ID > tom Enter case sensitive pa

25 sys admin>>LISTUSERS 1: User id > PETE 2: User id > KEVIN 3: User id > TONY sys admin>>LISTUSERS /ALL 1: User id > PETE

1.0 Product Description ...

26 To delete a user ID using the record number, specify the number as a qualifier after the DELETEUSER command in the form DELETEUSER /N, where N is

27 sys admin>>terminal 1 Enter accepts present value T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 9600> T1: 0=1, 1=2

28 sys admin>>TERMINALS 1 Enter accepts present value T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 38400> T1: 0=1, 1=2

29The NETWORK command will either display the network settings of the installed network cards or change those settings depending on which command qua

30 sys admin>>NETWORK /ALL Enter accepts present value N-B: Enter IP address | 000.000.000.000> N-B: Enter Subnet Mask

31 sys admin>>NETWORK B Enter accepts present value N-B: Enter IP address | 000.000.000.000> 172.16.1.1 N-B: Enter Subnet Mask

32 sys admin>>MODEM Enter accepts present value Init string | > ATB2H0 Save changes and update modem card? Yes or No: No>yes Modem card

33 sys admin>>CONNECTIONS Terminal Connection List 01 KEVIN 01 SERVER ( Monitor mode ) 02 00

346.7.2 LISTCARDSLISTCARDSLISTCARDSLISTCARDS Command Sys admin>>LISTCARDS Installed cards Slot A : <card not installed> Slot B : Termin

356.7.4 INFOINFOINFOINFO Command sys admin>>INFO A Slot A1: Modem: No Active Call Timeout = 1 mins. Current Modem State: in command mode Mod

7.0 User Access and Interface...

36• The primary IP information, including: IP address, subnet mask, and gateway • The secondary IP information, including: destination address, sub

37no time/date stamp on system activity. If a time/date stamp is required, it must be provided by the system capturing the data output. Connection

386.8.1 LINESPERPAGELINESPERPAGELINESPERPAGELINESPERPAGE Command sys admin>>LINESPERPAGE Lines per page set to 22 sys admin>LINESPERPAGE

39 The BREAK command allows the sys admin to disconnect a user from the device port to which they were connected if they are in monitor, listen, or d

40The TELNETTIMEOUT command allows the sys admin to define the amount of time that a network card may have an idle telnet session before breaking the

41the ConsoleServer 3200 to restore the system settings. It is not possible to use the BACKUP and RESTORE commands from a network sys admin session.

42To change the system prompt to the default (LCI3200>), use the command PROMPT /DEFAULT. 6.12 Updating the ConsoleServer 3200 Software As new

437.0 User Access and Interface 7.1 Terminal Card Each terminal card has four (4) RJ45 connector ports to which a terminal may be attached, giving

44 At power-up, the network card does not respond to network connect requests until the control card has completed its system initialization. Once t

45sections above). This indicates that the user is not currently logged in and that no servers may be reached through the ConsoleServer 3200. The p

11.0 Product Description The ConsoleServer 3200 (also referred to as the CS 3200) is one of the most versatile network administration tools availabl

46MONITOR (A.K.A. DEVICE) MODE HELP: F1 - Display Help Screen (VT100 mode) F2 - Display Pull Down Menu (VT100 mode) TTY COMMANDS: (MONITOR

477.5 Logging In and Changing Passwords F2 PULL-DOWN MENU SHOWING INITIAL MENU CHOICES ┌─────────────────┐

48password and press <ENTER>. The ConsoleServer 3200 will then prompt the user for the new password by displaying the prompt PLEASE ENTER NEW

49are logged in, which devices they have currently selected, and which mode they are in. Users may also view this information by selecting DISPLAY C

50not have permission to access a server, the ConsoleServer 3200 will display the message NO ACCESS TO DEVICE CHANNEL, and the connection will not be

51F2 PULL-DOWN MENU TO LISTEN TO A DEVICE PORT PART 2 ┌───────────────────────────────────────────────────┐ │

527.10 Direct Mode F2 PULL-DOWN MENU SHOWING DEVICE (A.K.A. MONITOR) MODE OPTIONS ┌─────────────────────────┐

53software used. It is also recommended that the user avoid combinations of the <CTRL> key and other keys, as these combinations are usually r

54When at the monitor mode prompt, the user may view the contents of the buffer using the commands TOP, BOTTOM, NEXT, PREVIOUS, FORWARD, and REVERSE,

55FORWARD FORWARD N LINES skip forward N lines in buffer REVERSE REVERSE N LINES skip back N lines in buffer The commands FORWARD and REVERSE must

21.1 Features • Connect up to thirty-two RS-232C compatible console ports • No break sent to attached servers at any time unless sent by a user •

568.0 The Break Generation Sequence F2 PULL-DOWN MENU TO CHANGE BREAK SEQUENCE ┌──────────────────────────┐

579.0 Displaying System Information F2 PULL-DOWN MENU TO DISPLAY SYSTEM INFO ┌─────────────────┐

5810.0 Front Panel Display Information: The up/down arrow keys are used to scroll through multi-page displays. Lightwave Communications, Inc.

59Panel 3 (press down) Panel 4 (press down) The next series of panel shows the port number along with the name of the device connected to that p

60Panel 7 (press down) Panel 8 (press down) Panel 9 (press down) The next series of panels displays the inventory of cards that are installed in

61Panel 12 (press down) The last panel displays the status of the power supplies. Panel 13 (press down)

62Appendix A – Adapter & Connector Pinouts Title:Size:Part NumberRev:SheetFile:System:AA0101ofTerminal / Device RJ45 Connector PinoutsConsoleServ

63Title:Size:Part NumberRev:SheetFile:System:AA200d0066.vsd 0101ofRJ45 Receptical to DB25M Adapter200.0066ConsoleServer 32002DB25MALE3456782032786514

64Title:Size:Part NumberRev:SheetFile:System:AA200d0067.vsd 0101ofRJ45 Receptical to DB25F Adapter200.0067ConsoleServer 32002DB25FEMALE34567820327865

65Title:Size:Part NumberRev:SheetFile:System:AA200d0070.vsd 0101ofRJ45 Receptical to DB9F Adapter200.0070ConsoleServer 32001DB9FEMALE234567812345678R

32.0 System Overview 2.1 Connect Up to Thirty-two RS-232C Compatible Ports The ConsoleServer 3200 is plug-compatible with any RS-232C device. Thes

66

67Appendix B – Field Update of Console Server 3200 Flash Memory B.1 Introduction The system administrator may desire to update the software held in

68application code version, which is listed first) is greater than 1.70, then Kermit may be used to transfer the binary update files; otherwise, Xmod

69to be updated at this prompt. See page XX for slot letter ID’s. For most cards, the processor number will be 1; network cards have two processors

70 The tftp server must be specified by a numerical IP address. The file path and name on the server is specified after the IP address. local seria

71 B.6 Ending the Flash Update Slot (letter) Processor (number) Ex. C1 (exit to restart system): EXIT Starting system ConsoleServer 3200 Contro

72SWITCHBBBBBBBBBDDCCDDDDDDCCCCCCDEVICEAAADEVICE CONTROLAAAAAADEVICE DEVICE DEVICEDEVICEDEVICEDEVICEBBBBDDDD0ICCCCAAAATERMINALTERMINAL SWITCHTERMINAL

73 Appendix C – System Specifications C.1 Physical Width: 17.25 inches (43.82 cm) Depth: 14.75 inches (37.47 cm) Height: 5.25 inches

74C.4 Interface C.4.1 Terminal and Device Connector: RJ45 with adapters for EIA-standard connectors (DB9 and DB25) Specification: EIA-232 Maxi

75Appendix D -DC Power The DC power version of the ConsoleServer 800 must be installed in a restricted access location. Per the intent of the Natio

4 The modem card connects directly to an ordinary phone jack (RJ11) to interface with a telephone network. The sys admin may designate a modem initi

76 Input voltage: -48 VDC Minimum voltage: -40 VDC Maximum voltage: -60 VDC Maximum operating current: 1.5 A Maximum input surge

77The DC power source must be: • electrically isolated from any AC source • reliably connected to earth • capable of providing up to 100 Watts of

78Appendix E – Command Abbreviations Most, but not all, commands available on the ConsoleServer 3200 may be abbreviated. The following list outline

79Terminal, Network, and Modem Commands: command abbreviation bottom bo bye bye changepswd ch clear cl connections co devlist de direct dir diselect

80Appendix F – Hexadecimal ASCII Code Equivalent characters in italics are non-printing characters or signals. Hexadecimal Code Equivalent Characte

81 Hexadecimal Code Equivalent Character Hexadecimal Code Equivalent Character 40 @ 60 ` 41 A 61 a 42 B 62 b 43 C 63 c 44 D 64 d 45

82Index Abbreviations – 16, 19-20, 45, 76-77 Backing up system settings – 39-40 Breaks – 2, 5 editing generation sequence - 55 sending - 55 B

83 see also: User Network Card – 1-3, 5-6 checking settings – 34-35 connecting to – 42-43 idle timeout – 38-39 setting parameters – 27-30

84 directly interacting with device port – 51-52 editing break sequence - 55 editing direct mode escape sequence – 51-52 logging in - 46 log

53.0 System Components Each ConsoleServer 3200 consists of three major components: chassis, device cards, and access cards. 3.1 Chassis The chassi