Lightwave Communications Server 3200 Manual de usuario descargar pdf (Pagina 74)

The tftp server must be specified by a numerical IP address. The file path and name on

the server is specified after the IP address.

local serial connection:

sys admin>> tftp /b 172.16.1.1:fdevice.bin

Starting tftp download.................................................

.......................................................................

.........................

Download complete.

sys admin>>

In the example above, the sys admin is connected through a local serial connection.

The tftp download is performed through slot b (/b qualifier) from the tftp server at

172.16.1.1, and the file fdevice.bin is retrieved.

network session:

sys admin>> tftp 172.16.1.1:fdevice.bin

Starting tftp download.................................................

.......................................................................

..........................

Download complete.

sys admin>>

In the example above, the sys admin is connected through a network session. The tftp

download is performed through the same card to which the sys admin is connected.

sys admin>> tftpkill

If for some reason the tftp download must be halted, the command TFTPKILL can be

entered at the sys admin>> prompt to stop any download in progress. This must be

entered at the local serial connection or at a remote Sys Admin session to a network

card other than that used by the tftp transfer.

sys admin>> lciupdate /tftp h1

Once a flash update file has been downloaded via tftp, it can be sent to the appropriate

card using the LCIUPDATE command with the qualifier /TFTP. This sends the last

downloaded file to the card processor specified.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 87 88

Sin comentarios

Lightwave Communications Server 3200 Manual de usuario Pagina 74